L1 Model II system
with ToneMatch® audio engine
Quite simply, our most advanced system for musicians. Powerful tone-shaping technologies combined with our smoothest, most consistent sound coverage, all in our most compact and portable L1 system ever. Take your live sound in a new direction.
L1® Model II single bass package with ToneMatch® audio engine
$2,998.00
Included items
L1 Model II single bass package
T1 ToneMatch audio engine
L1 Model II double bass package with ToneMatch audio engine
$3,297.00
Included items
L1 Model II double bass package
T1 ToneMatch audio engine
The premier Bose® L1 loudspeaker system for musicians with our smoothest, most consistent sound coverage and most powerful tone-shaping tools. Lightweight and modular, this sleek system fits easily into a car trunk and takes just a few minutes to set up.
Our premium sound system for musicians combines the L1 Model II system and T1 ToneMatch audio engine. This professional sound system provides wide coverage, smooth tonal balance and a suite of studio-class effects and tone-shaping tools. And it's packed with proprietary Bose technologies designed to improve your amplified sound.
Sound advantages—only from Bose
The system's breakthrough loudspeaker produces wide, uniform sound coverage of nearly 180 degrees—onstage and throughout an audience of up to several hundred—with little dropoff in volume and tone.
The Model II system also features Articulated Array speaker technology for better tonal balance. The loudspeaker's 24 vertically mounted drivers are precisely angled to create clearer highs and more consistent tone in the room. Even people off to the sides of these stage speakers enjoy well-balanced, detailed sound.
Powerful multichannel audio engine
Combining the T1 ToneMatch audio engine with your L1 concert speakers gives you exceptional amplified tone and sound processing capabilities. The compact, four-channel engine provides fingertip control of our largest library of ToneMatch presets. Just touch a button to make hundreds of precise refinements to the sound of instruments and microphones.
Deep bass from small enclosures
Bose L1 Model II systems come with one B1 bass module to ensure more accurate amplification of lower notes for most voices and instruments—including guitars, keyboards and various horns.
The double bass package is recommended for use as a bass guitar amplifier, and for kick drums and DJs.
Light and easy
The L1 Model II power stand weighs only 24 pounds, and its four retractable legs make it very easy to transport and set up. The power stand also has a simplified control section; the single line-level input can be used with instruments, mics, mixers, laptops, MP3 players or DVD systems.
All of the system's components are also built to handle the road. The loudspeaker has a rugged, reinforced grille, and each package includes padded carrying bags for major components.
Spatial Dispersion™ and Articulated Array speaker technologies
in the loudspeaker produce wide, uniform sound coverage. The 24 small drivers are arranged using Articulated Array speaker technology in a slim, vertical enclosure—creating nearly 180 degrees of horizontal coverage and consistent tonal balance. The loudspeaker's two-piece, interlocking design makes for quick and easy setup, breakdown and transport.
Integrated power amplifiers
in the power stand provide clean, precise amplification for L1 Model II system with up to two B1 bass modules.
ToneMatch® port
on power stand for digital audio and power connection to ToneMatch audio engine.
Analog input, trim control and signal/clip LED
for line-level analog input via ¼" TRS phone cable. Can be used for instruments or other audio sources like DJ mixers, MP3 players, computers or DVD systems.
Bass module out
for amplified bass output signal to one or two B1 bass modules. L1 system automatically adjusts equalization appropriately when bass modules are connected.
Bass line out
delivers post-DSP bass signal output. Accepts ¼" TRS phone cable. Use to connect powered subwoofer, additional amplification system or Bose® PackLite® amplifier with up to two additional bass modules.
Retractable legs
provide stability for streamlined L1 Model II power stand and loudspeaker. Four retractable legs fold out of power stand simultaneously for quick setup and compact transport.
Bass module
Compact, lightweight enclosure
is easy to transport, set up and break down. Small footprint takes up considerably less space than traditional bass cabs required for same performance. Interlocking feet let you securely stack up to four modules together on their sides.
Highly efficient speaker design
features two 5.25" (13.3 cm), high-output, high-excursion drivers that produce deep, strong bass from a small enclosure. When connected to power stand, active equalization circuitry automatically adjusts bass signal appropriately.
ToneMatch audio engine
Integrated ToneMatch audio engine and audio technologies
provide four independent channels featuring our largest library of ToneMatch instrument and microphone presets, proprietary zEQ and a complete suite of studio-class effects and sound processors.
Proprietary zEQ
automatically adjusts the range of tone controls to match your voice or instrument, making it easier to fine tune your sound. Conventional mixers may have fixed EQ ranges that don't accurately affect desired frequencies when adjusted. But zEQ appropriately redefines low, mid and high frequency ranges of specified sources.
Single-band ParaEQ
centers on frequency you specify for each independent channel. Valuable tool for reshaping problematic frequencies in certain venues.
Five reverb types
(small, medium, large, plate and cavern) available for global assignment, with individual channel controls for decay time, mix level and brightness.
Three delay types
(analog, digital and tape) can be independently assigned to selected channels, with control over feedback time and mix level for each channel. For example, you can select tape delay for your vocal on channel 1 and analog delay for your guitar on channel 2.
Ten modulation effects
(three chorus types, two flange types, four phaser types and one vintage tremolo effect) can be independently assigned to selected channels, with control over designated parameters for each channel.
Seven dynamics processing types
(three compressors, limiter, de-esser, kick gate and noise gate) can be assigned to independent channels.
Scenes
allow you to store, recall and edit "snapshots" of all key ToneMatch audio engine settings at any given time. This feature helps simplify setup when you're using an L1 system repeatedly in different venues. The engine includes five predefined Bose scenes, five My scenes and five Shared scenes you can give to other L1 owners.
Chromatic tuner
for convenient tuning of instruments.
Large backlit display
with intuitive layout and easy-to-read text for modes and settings.
Rotary encoder
for quick access to modes, effects and parameters, including ToneMatch presets, zEQ, ParaEQ, reverbs, delays, modulators, dynamics processing, scenes and tuner. Features clean, circular layout.
Aux mode (channels 1 – 3)
send channels' dry, pre-fader or post-fader audio to aux output for connection to additional L1 systems or recording devices. Independent level controls for optimal signal output.
Channel volume, mute and FX mute (1 – 4/5)
for adjusting individual channel volume, muting individual channels and muting all effects on selected channels.
Master volume
adjusts overall level of master output.
Phantom power
applies +48V power to input channels 1 – 3 to drive specific microphones.
ToneMatch cable
transfers audio signals and provides power to ToneMatch audio engine from L1 Model II power stand. Use the optional T1 power supply for connections to L1 Model I and Compact systems.
Mounting bar and carriage
for securely attaching ToneMatch audio engine to L1 Model I or Model II loudspeaker.
Cover and carrying case
help protect engine when storing and transporting.
Main Inputs/Outputs
Mic/line inputs (1 – 3)
Analog channels with combination connectors accepting balanced XLR or unbalanced 1/4" TRS audio cables.
Line inputs (4/5, L/R)
Analog channels for stereo connections to keyboards, mixers and computers. Inputs accept balanced 1/4" TRS cable. Edit control affects both channels.
Trim controls and signal/clip LEDs (1 – 4/5)
Adjust levels of input signals. Green/yellow/red LEDs show signal status and help you set gain levels properly.
Preamp outputs (1 – 3)
For connecting channels' dry output signals to recording gear or other amplifiers via balanced 1/4" TRS cable.
Aux output
Use with aux mode to create independent submix of channels 1 – 4/5 to route to other amplifiers or recording gear.
Master output
Analog output for connecting to additional L1 systems, amplifiers orrecording gear via balanced 1/4" TRS cable. Select from pre- or post-mastervolume settings.
ToneMatch port
Connect digital output of engine to L1 Model II power stand via included ToneMatch digital cable. Single cable also supplies power to engine.
USB port
Update ToneMatch audio engine and back up scenes via USB connection to your computer.
|
|
|
|
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
|
|
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
